1. DTC C1725[11] description
When the turn signal switch signal or hazard warning flasher switch signal is input, the BCM controls the turn signal light output circuit and illuminates the turn signal light. If the BCM detects a malfunction in the turn signal light (rear left) output circuit, the DTC is set.
2. Condition for setting DTC C1725[11]
Condition for running the DTC
- The BCM commands the turn signal light (rear left) ON.
Condition for setting the DTC
- The BCM detects a short to ground or an overloading to the turn signal light (rear left) output circuit.
3. Action taken when DTC C1725[11] sets
- The output of the turn signal light (rear left) is stopped until the next command is given.
- Current and past failures are set.