DTC P1A04[46] EEPROM Error (Differential Lock)

1. Differential lock control system check

Refer to "53.Driveline Control 3A.Troubleshooting(Differential Lock) diagnostic system check - differential lock controls".

2. Current DTC check

1) Clear the DTC with a scan tool.

2) Turn OFF the ignition switch for 30 seconds or more.

3) Turn ON the ignition switch.

4) Observe the DTC information with a scan tool. Is a DTC set?

Yes

=>Go to Rear differential lock control unit replacement.

No

=>Go to Repair verification.

3. Rear differential lock control unit replacement

Refer to "3.Driveline, Axle 3Z.Driveline, Axle Electrical Control rear differential lock control unit removal".

Refer to "3.Driveline, Axle 3Z.Driveline, Axle Electrical Control rear differential lock control unit installation".

Refer to "3.Driveline, Axle 3Z.Driveline, Axle Electrical Control rear differential lock control unit setting".

Procedure completion

=>Go to Repair verification.

4. Repair verification

1) Clear the DTC with a scan tool.

2) Turn OFF the ignition switch for 30 seconds or more.

3) Turn ON the ignition switch.

4) Observe the DTC information with a scan tool.