1. DTC C0526[85] description
The steering angle sensor detects the rotation angle of the steering shaft and converts it into an electrical signal. The steering angle sensor signal is sent to the EHCU via CAN communication. When the EHCU detects an abnormal steering angle sensor signal, this DTC is set.
2. Condition for setting DTC C0526[85]
Condition for running the DTC
- The ignition switch is ON.
Condition for setting the DTC
- The EHCU detects an abnormal signal from the steering angle sensor.
3. Action taken when DTC C0526[85] sets
- ESC warning light illumination (Models equipped with ESC)
- TCS control inhibition (Models equipped with ESC)
- ESC control inhibition (Models equipped with ESC)
- HSA control inhibition (Models with ESC)
- ISS control inhibition (Models with ESC)
- Hill Descent Control inhibition (Models with ESC)