1. DTC P0830[9E] description
The EHCU receives a clutch switch signal from the ECM via the CAN communication circuit. When the EHCU detects that the clutch switch is stuck ON, this DTC is set.
2. Condition for setting DTC P0830[9E]
Condition for running the DTC
- The transmission type is manual transmission.
- The vehicle is running at a speed of 10 km/h {6 mph} or more.
Condition for setting the DTC
- The vehicle speed is 10 km/h {6 mph} or less after the EHCU detects a clutch switch ON status for 5 minutes.
3. Action taken when DTC P0830[9E] sets
- HSA control inhibition (Models with ESC)
- Hill Descent Control inhibition (Models with ESC)