| DTC |
DTC title |
Condition for running the DTC |
Condition for setting the DTC |
Action taken when DTC sets |
| C1106[04] |
DTC C1106[04] Internal Error |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. |
・The radar sensor (Right) detects a malfunction in the internal parts. |
・The BSM OFF indicator light illuminates. ・The master warning indicator light illuminates. ・The Radar failure is displayed on the multi-information display. ・All of the functions are deactivated. |
| C1106[42] |
DTC C1106[42] Memory Error |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. |
・The radar sensor (Right) detects a RAM or ROM malfunction. |
・The BSM OFF indicator light illuminates. ・The master warning indicator light illuminates. ・The Radar failure is displayed on the multi-information display. ・All of the functions are deactivated. |
| C1106[46] |
DTC C1106[46] Configuration Failure |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. |
・The radar sensor (Right) detects an EEPROM malfunction. |
・The BSM OFF indicator light illuminates. ・The master warning indicator light illuminates. ・The Radar failure is displayed on the multi-information display. ・All of the functions are deactivated. |
| C1106[4B] |
DTC C1106[4B] Overtemperature |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. |
・It is detected that the internal temperature of the radar sensor (Right) is 112°C {234°F} or more or -40°C {-40°F} or less. |
・The BSM OFF indicator light illuminates. ・The Radar unavailable is displayed on the multi-information display. ・All of the functions are deactivated. |
| C1106[55] |
DTC C1106[55] No Configured |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. |
・The radar sensor (Right) detects that the radar sensor (Right) programming is not performed. |
・The BSM OFF indicator light illuminates. ・The master warning indicator light illuminates. ・The Radar failure is displayed on the multi-information display. ・All of the functions are deactivated. |
| C1106[57] |
DTC C1106[57] Software Compatibility Error |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. |
Any of the following are met: ・An unmatched software version is detected in the radar sensor (Left) or radar sensor (Right). ・An unmatched EOL setting value is detected in the radar sensor (Left) or radar sensor (Right). |
・The BSM OFF indicator light illuminates. ・The master warning indicator light illuminates. ・The Radar failure is displayed on the multi-information display. ・All of the functions are deactivated. |
| C1106[95] |
DTC C1106[95] Sensor ID Failure |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. |
・The radar sensor (Right) detects an error in the radar sensor (Right) Sensor ID. |
・The BSM OFF indicator light illuminates. ・The master warning indicator light illuminates. ・The Radar failure is displayed on the multi-information display. ・All of the functions are deactivated. |
| C1106[97] |
DTC C1106[97] Dirt Blockage |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. |
・The radar sensor (Right) detects dirt on the radar sensor (Right) or rear step bumper (inside/outside). |
・The BSM OFF indicator light illuminates. ・The Radar clean-up is displayed on the multi-information display. ・All of the functions are deactivated. |
| C1106[99] |
DTC C1106[99] Auto Alignment Exceeded |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. |
・The radar sensor (Right) detects that the axial shifting in the lateral direction is ±7.4° or more. |
・The BSM OFF indicator light illuminates. ・The master warning indicator light illuminates. ・The Radar failure is displayed on the multi-information display. ・All of the functions are deactivated. |
| C1106[A2] |
DTC C1106[A2] Battery Voltage Low |
・5 seconds or more have passed with the ignition switch ON. ・The vehicle speed is 10 km/h {6 mph} or more. |
・The radar sensor (Right) detects that the ignition voltage is less than 9 V for 10 second or more. |
・The BSM OFF indicator light illuminates. ・All of the functions are deactivated. |
| C1106[A3] |
DTC C1106[A3] Battery Voltage High |
・5 seconds or more have passed with the ignition switch ON. |
・The radar sensor (Right) detects that the ignition voltage is 16 V or more for 10 seconds. |
・The BSM OFF indicator light illuminates. ・All of the functions are deactivated. |
| U0055[88] |
DTC U0055[88] Chassis CAN bus Off |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. |
・The radar sensor (Right) detects a Bus OFF status in the Chassis CAN communication circuit. |
・The BSM OFF indicator light illuminates. ・The master warning indicator light illuminates. ・The Radar failure is displayed on the multi-information display. ・All of the functions are deactivated. |
| U0100[00] |
DTC U0100[00] ECM Signal Timeout |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. ・DTC U0055[88] is not set. |
・The radar sensor (Right) detects that the control information sent from the ECM cannot be obtained. |
・The BSM OFF indicator light illuminates. ・All of the functions are deactivated. |
| U0121[00] |
DTC U0121[00] EHCU Signal Timeout |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. ・DTC U0055[88] is not set. |
・The radar sensor (Right) detects that the control information sent from the EHCU cannot be obtained. |
・The BSM OFF indicator light illuminates. ・All of the functions are deactivated. |
| U0126[00] |
DTC U0126[00] Steering Angle Sensor Signal Timeout |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. ・DTC U0055[88] is not set. |
・The radar sensor (Right) detects that the control information sent from the steering angle sensor cannot be obtained. |
・The BSM OFF indicator light illuminates. ・All of the functions are deactivated. |
| U0140[00] |
DTC U0140[00] BCM Signal Timeout |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. ・DTC U0055[88] is not set. |
・The radar sensor (Right) detects that the control information sent from the BCM cannot be obtained. |
・The BSM OFF indicator light illuminates. ・The master warning indicator light illuminates (if the blind spot indicator illumination signal, blind spot indicator OFF signal, and blind spot indicator flashing signal sent from the BCM cannot be obtained) • The Radar failure is displayed on the Multi-Information Display (if the blind spot indicator illumination signal, blind spot indicator OFF signal, and blind spot indicator flashing signal sent from the BCM cannot be obtained). ・All of the functions are deactivated. |
| U0401[00] |
DTC U0401[00] ECM Signal Invalid |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. ・DTC U0100[00] is not set. |
・The radar sensor (Right) detects an error in the data received from the ECM. |
・The BSM OFF indicator light illuminates. ・All of the functions are deactivated. |
| U0415[00] |
DTC U0415[00] EHCU Signal Invalid |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. ・DTC U0121[00] is not set. |
・The radar sensor (Right) detects an error in the data received from the EHCU. |
・The BSM OFF indicator light illuminates. ・All of the functions are deactivated. |
| U0428[00] |
DTC U0428[00] Steering Angle Sensor Signal Invalid |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. ・DTC U0126[00] is not set. |
・The radar sensor (Right) detects an error in the data received from the steering angle sensor. |
・The BSM OFF indicator light illuminates. ・All of the functions are deactivated. |
| U0431[00] |
DTC U0431[00] BCM Signal Invalid |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. ・DTC U0140[00] is not set. |
・The radar sensor (Right) detects an error in the data received from the BCM. |
・The BSM OFF indicator light illuminates. ・The master warning indicator light illuminates (if the blind spot indicator illumination signal, blind spot indicator OFF signal, and blind spot indicator flashing signal sent from the BCM cannot be obtained) • The Radar failure is displayed on the Multi-Information Display (if the blind spot indicator illumination signal, blind spot indicator OFF signal, and blind spot indicator flashing signal sent from the BCM cannot be obtained). ・All of the functions are deactivated. |
| U1300[88] |
DTC U1300[88] Local CAN bus Off |
・The ignition voltage is 10.0 to 16.0 V. ・5 seconds or more have passed with the ignition switch ON. |
・The radar sensor (Right) detects a Bus OFF status in the Local CAN communication circuit. |
・The BSM OFF indicator light illuminates. ・The master warning indicator light illuminates. ・The Radar failure is displayed on the multi-information display. ・All of the functions are deactivated. |