1. DTC P2610 description
This diagnosis applies to the internal microprocessor integrity conditions within the ECM. This diagnosis also checks if the ECM is programmed.
2. Condition for setting DTC P2610
Condition for running the DTC
- The engine run time is 30 seconds or more.
Condition for setting the DTC
- The ECM detects an internal malfunction or incomplete programming.
3. Action taken when DTC P2610 sets
- The ECM illuminates the MIL. Refer to Action taken when DTC sets - Type A.
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 with DPD) DTC type definitions".
4. Condition for clearing DTC P2610
- Refer to Conditions for clearing the MIL/DTC - Type A or Type B.
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 with DPD) DTC type definitions".