DTC B1E07[06] Unregistered Transponder Key Detection (Wireless Access Module (Mid-version/Lo-version [Except Passive Entry and Start System]))

1. Wireless access module system check

Refer to "71.Security and Locks Control 10S.Troubleshooting(Wireless Access Module (Mid-version/Lo-version [Except Passive Entry and Start System])) Diagnostic system check-Wireless Access Module (Mid-version/Lo-version [Except Passive Entry and Start System])".

2. Current DTC check

1) Turn OFF the ignition switch.

2) Turn ON the ignition switch.

3) Observe the DTC information with a scan tool. Is a DTC set?

Yes

=>Go to Transponder information programming.

No

=>Go to Repair verification.

3. Transponder information programming

1) Perform "Transponder Key Registration" on the scan tool.

Refer to "9.Body, Cab, Accessories 9Z.Body, Cab, Accessories Electrical Control wireless access module setting (without passive entry and start system)".

Procedure completion

=>Go to Repair verification.

4. Repair verification

1) Turn OFF the ignition switch.

2) Turn ON the ignition switch.

3) Observe the DTC information with a scan tool.