1. DTC P0500[86] description
The wireless access module uses the vehicle speed signal received from the EHCU and controls power mode switching. If the wireless access module detects an abnormal vehicle speed signal from the EHCU, the DTC is set.
Note
- Although this DTC is set, the engine can be started using emergency starting.
2. Condition for setting DTC P0500[86]
- The wireless access module detects abnormal vehicle speed signals.
3. Action taken when DTC P0500[86] sets
When the engine start/stop button is pressed:
- The key monitor warning light illuminates for 10 seconds.
- CHECK SYSTEM will be displayed on the multi-information display for 10 seconds.
- The buzzer built into the instrument panel cluster will sound 3 times.
When the power mode is ON and there is a current failure:
- The key monitor warning light illuminates.
When door locking/unlocking is requested:
- The key monitor warning light illuminates for 10 seconds.
- CHECK SYSTEM will be displayed on the multi-information display for 10 seconds.
- The external buzzer will sound for 3 seconds.