1. DTC P0830[13] description
The wireless access module monitors the operation status of the clutch switch. For models equipped with manual transmissions, the clutch switch signal input is used for engine start-up control. If the wireless access module detects that the clutch switch is OFF continuously, the DTC is set.
Note
- Although this DTC is set, the engine can be started using emergency starting.
2. Condition for setting DTC P0830[13]
- The wireless access module detects that the clutch pedal is depressed (the clutch switch is OFF) continuously for 15 minutes.
3. Action taken when DTC P0830[13] sets
When the engine start/stop button is pressed:
- The key monitor warning light illuminates for 10 seconds.
- CHECK SYSTEM will be displayed on the multi-information display for 10 seconds.
- The buzzer built into the instrument panel cluster will sound 3 times.
When the power mode is ON:
- The key monitor warning light illuminates.
When door locking/unlocking is requested:
- The key monitor warning light illuminates for 10 seconds.
- CHECK SYSTEM will be displayed on the multi-information display for 10 seconds.
- The external buzzer will sound for 3 seconds.