DTC List (Wireless Access Module (Mid-version/Lo-version [Except Passive Entry and Start System]))

DTC	DTC title	Condition for running the DTC	Condition for setting the DTC	Action taken when DTC sets
B1033[54]	DTC B1033[54] TPMS Not Programmed	-	・The wireless access module detects that all the tire air pressure sensor IDs are not registered.	・The TPMS warning light illuminates after flashing for 63 seconds.
B1033[61]	DTC B1033[61] TPMS Auto Location Error	-	・The wireless access module detects that the automatic location is not complete within the specified time.	・The TPMS warning light illuminates after flashing for 63 seconds.
B1035[49]	DTC B1035[49] Immobilizer IC Internal Circuit Failure	・Models with immobilizer function ・The ignition switch is ON.	・The wireless access module detects a communication failure with the internal immobilizer IC.	・If this DTC is set before the engine is started, the engine cannot be started. When the ignition switch is ON: ・The key monitor warning light illuminates. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only). When door locking/unlocking is requested: ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only).
B1035[51]	DTC B1035[51] Immobilizer Security Code Not Programmed	・Models with immobilizer function ・The ignition switch is ON.	・The wireless access module detects that the security code is not programmed.	・If this DTC is set before the engine is started, the engine cannot be started. When the ignition switch is ON: ・The key monitor warning light illuminates.
B1035[54]	DTC B1035[54] Transponder Not Programmed	・Models with immobilizer function ・The ignition switch is ON.	・The wireless access module detects that no transponder information is registered.	・If this DTC is set before the engine is started, the engine cannot be started. When the ignition switch is ON: ・The key monitor warning light illuminates.
B1089[41]	DTC B1089[41] EEPROM Checksum Failure	-	・The wireless access module detects EEPROM check sum errors.	・The wireless access module stops the functions except the diagnosis function. When the ignition switch is ON: ・The key monitor warning light illuminates. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only). When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only).
B1089[44]	DTC B1089[44] ECU Failure (Data Memory Failure)	-	・The wireless access module detects an EEPROM malfunction.	・The wireless access module stops the functions except the diagnosis function. When the ignition switch is ON: ・The key monitor warning light illuminates. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only). When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only).
B1089[45]	DTC B1089[45] ECU Failure (Program Memory Failure)	-	・The wireless access module detects ROM check sum errors.	・The wireless access module stops the functions except the diagnosis function. When the ignition switch is ON: ・The key monitor warning light illuminates. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only). When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only).
B1089[F0]	DTC B1089[F0] Security Lock Not Implemented	-	・The wireless access module detects that ECU Lock is not performed.	-
B1316[11]	DTC B1316[11] TPMS Set Switch Circuit Short to Ground	-	・The wireless access module detects a short to ground in the TPMS load selector switch signal circuit for 3 minutes or more.	・The tire air pressure specified value is set as the specified value for the loaded vehicle.
B170C[0A]	DTC B170C[0A] Indicator Output Circuit Failure	-	・When the key monitor warning light is commanded ON, the wireless access module detects a malfunction in the output circuit.	・The wireless access module stops the output of the key monitor warning light.
B1E07[06]	DTC B1E07[06] Unregistered Transponder Key Detection	・Models with immobilizer function ・The ignition switch is ON. ・When authenticating with a transponder	・The wireless access module detects a transponder which is not programmed or cannot be authenticated.	・If this DTC is set before the engine is started, the engine cannot be started. ・When the ignition switch is ON: ・The key monitor warning light illuminates.
B1E07[09]	DTC B1E07[09] Transponder Failure	・Models with immobilizer function ・The ignition switch is ON. ・When registering a transponder information	・The wireless access module detects that the transponder built into the keyless entry key or transponder key cannot be programmed because it is damaged.	-
B1E07[61]	DTC B1E07[61] Transponder Secret Key Mismatch	・Models with immobilizer function ・The ignition switch is ON. ・When authenticating with a transponder	・The wireless access module detects that the secret key of the transponder and the secret key registered in the wireless access module for immobilizer authentication do not match.	・If this DTC is set before the engine is started, the engine cannot be started. When the ignition switch is ON: ・The key monitor warning light illuminates.
B1E07[64]	DTC B1E07[64] Deactivated Transponder Detected	・Models with immobilizer function ・The ignition switch is ON. ・When authenticating with a transponder	・The wireless access module detects a keyless entry key or transponder key with previously cleared transponder information.	・If this DTC is set before the engine is started, the engine cannot be started. When the ignition switch is ON: ・The key monitor warning light illuminates.
B1E07[65]	DTC B1E07[65] Transmission No Response	・Models with immobilizer function ・The ignition switch is ON. ・When authenticating with a transponder	・The wireless access module detects that response signals from the transponder cannot be received.	・If this DTC is set before the engine is started, the engine cannot be started. When the ignition switch is ON: ・The key monitor warning light illuminates.
B1E08[13]	DTC B1E08[13] Immobilizer Coil Circuit Open	・Models with immobilizer function ・The ignition switch is ON.	・The wireless access module detects an open circuit in the immobilizer coil circuit.	・If this DTC is set before the engine is started, the engine cannot be started. When the ignition switch is ON: ・The key monitor warning light illuminates. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only). When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only).
B1E09[04]	DTC B1E09[04] Front Right TPMS Sensor Internal Circuit Failure	-	・The wireless access module detects the data error from the right front tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more.	・The TPMS warning light illuminates after flashing for 63 seconds.
B1E09[31]	DTC B1E09[31] Front Right TPMS Sensor No Signal	-	・The wireless access module detects that the data cannot be received from the right front tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more.	・The TPMS warning light illuminates after flashing for 63 seconds.
B1E09[A2]	DTC B1E09[A2] Front Right TPMS Sensor Battery Voltage Low	-	・The wireless access module receives the battery voltage decrease data from the right front tire air pressure sensor 15 times.	-
B1E0A[04]	DTC B1E0A[04] Front Left TPMS Sensor Internal Circuit Failure	-	・The wireless access module detects the data error from the left front tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more.	・The TPMS warning light illuminates after flashing for 63 seconds.
B1E0A[31]	DTC B1E0A[31] Front Left TPMS Sensor No Signal	-	・The wireless access module detects that the data cannot be received from the left front tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more.	・The TPMS warning light illuminates after flashing for 63 seconds.
B1E0A[A2]	DTC B1E0A[A2] Front Left TPMS Sensor Battery Voltage Low	-	・The wireless access module receives the battery voltage decrease data from the left front tire air pressure sensor 15 times.	-
B1E0B[04]	DTC B1E0B[04] Rear Right TPMS Sensor Internal Circuit Failure	-	・The wireless access module detects the data error from the right rear tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more.	・The TPMS warning light illuminates after flashing for 63 seconds.
B1E0B[31]	DTC B1E0B[31] Rear Right TPMS Sensor No Signal	-	・The wireless access module detects that the data cannot be received from the right rear tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more.	・The TPMS warning light illuminates after flashing for 63 seconds.
B1E0B[A2]	DTC B1E0B[A2] Rear Right TPMS Sensor Battery Voltage Low	-	・The wireless access module receives the battery voltage decrease data from the right rear tire air pressure sensor 15 times.	-
B1E0C[04]	DTC B1E0C[04] Rear Left TPMS Sensor Internal Circuit Failure	-	・The wireless access module detects the data error from the left rear tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more.	・The TPMS warning light illuminates after flashing for 63 seconds.
B1E0C[31]	DTC B1E0C[31] Rear Left TPMS Sensor No Signal	-	・The wireless access module detects that the data cannot be received from the left rear tire air pressure sensor for an accumulated time of 9 minutes and 5 seconds or more while the vehicle is driven at a speed of 30 km/h {19 mph} or more.	・The TPMS warning light illuminates after flashing for 63 seconds.
B1E0C[A2]	DTC B1E0C[A2] Rear Left TPMS Sensor Battery Voltage Low	-	・The wireless access module receives the battery voltage decrease data from the left rear tire air pressure sensor 15 times.	-
B1E15[02]	DTC B1E15[02] RF Signal Failure	・Models with keyless entry system	・The wireless access module detects a communication failure with the internal receiver.	When the ignition switch is ON: ・The key monitor warning light illuminates. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only). When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only).
B1E1B[54]	DTC B1E1B[54] Keyless Entry Key Not Programmed	・Models with keyless entry system	・The wireless access module detects that no keyless entry key is registered.	-
P0500[87]	DTC P0500[87] Invalid Data Received from Vehicle Speed Sensor	-	・The wireless access module receives invalid vehicle speed data from the ECM 50 consecutive times.	-
U0064[88]	DTC U0064[88] CAN Communication Malfunction (CAN Bus Off)	-	・The wireless access module detects a CAN Bus OFF status.	When the ignition switch is ON: ・The key monitor warning light illuminates. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only). When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only).
U0100[00]	DTC U0100[00] Lost Communication With ECM	・The ignition switch is ON.	・The wireless access module detects that CAN Bus messages from the ECM are not received for 5 seconds.	-
U0140[00]	DTC U0140[00] Lost Communication With BCM	・Models with keyless entry system	・The wireless access module detects that messages from the BCM are not received.	When the ignition switch is ON: ・The key monitor warning light illuminates. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only). When door locking/unlocking is requested: ・The key monitor warning light illuminates for 10 seconds. ・CHECK SYSTEM is displayed on the multi-information display for 10 seconds (models with MID only).
U0155[00]	U0155[00] Lost Communication With Meter	・The ignition switch is ON.	・The wireless access module detects that messages from the instrument panel cluster have not been received for 5 seconds or the data indicating a malfunction has been received 5 consecutive times.	-
U0401[00]	U0401[00] Lost Communication With Barometric Pressure Input Data	・The ignition switch is ON.	・The wireless access module detects that the barometric pressure data from the ECM has not been received for 5 seconds or the data indicating a malfunction has been received 2 consecutive times.	-
U1821[86]	U1821[86] Invalid Data Received from ABS	・The ignition switch is ON.	・The wireless access module detects that the wheel speed data from the EHCU has not been received for 5 seconds or the data indicating a malfunction has been received 25 consecutive times.	-
U1B01[66]	DTC U1B01[66] Unauthorized Signal Reception with ECM	・Models with immobilizer function ・The ignition switch is ON.	・The wireless access module receives authentication requests from the ECM over 20 times in 1 ignition cycle.	When the ignition switch is ON: ・The key monitor warning light illuminates.