1. DTC P0850[13] description
The wireless access module can switch the vehicle engine start-up conditions by programming the transmission specifications. For models equipped with manual transmissions, starting the engine is possible when the shift lever is in the N position and the clutch pedal is depressed. If the wireless access module detects that the shift lever position is N continuously while the vehicle is running, the DTC is set.
Note
- Although this DTC is set, the engine can be started using emergency starting.
2. Condition for setting DTC P0850[13]
- The wireless access module detects that the shift lever is in the N position continuously for 15 minutes while the vehicle is running at 15 km/h {9 mph} or more.
3. Action taken when DTC P0850[13] sets
When the engine start/stop button is pressed:
- The key monitor warning light illuminates for 10 seconds.
- CHECK SYSTEM will be displayed on the multi-information display for 10 seconds.
- The buzzer built into the instrument panel cluster will sound 3 times.
When the power mode is ON and there is a current failure:
- The key monitor warning light illuminates.
When door locking/unlocking is requested:
- The key monitor warning light illuminates for 10 seconds.
- CHECK SYSTEM will be displayed on the multi-information display for 10 seconds.
- The external buzzer will sound for 3 seconds.