1. DTC P0893 description
The TCM detects the braking torque using the feedback current detected from each clutch control solenoid. If the TCM detects a high braking torque, the DTC is set.
2. Condition for setting DTC P0893
Condition for running the DTC
- The ignition switch is ON.
Condition for setting the DTC
- Vehicle deceleration exceeds 0.2 G due to poor clutch or brake combination.
3. Action taken when DTC P0893 sets
- The TCM flashes the check trans warning light. Refer to Action taken when DTC sets - Type A.
Refer to "55.Transmission Control 5A.Troubleshooting(AWR6B45) DTC type definitions".
- The gear is fixed to 5th.
4. Condition for clearing DTC P0893
- Refer to Condition for clearing the MIL, check trans warning light/DTC - Type A or Type B.
Refer to "55.Transmission Control 5A.Troubleshooting(AWR6B45) DTC type definitions".