1. DTC B1035[49] description
The immobilizer coil is built into the engine start/stop button. When the engine start/stop button is pressed, the immobilizer coil is energized through the wireless access module, and the immobilizer authentication is performed by placing the electronic key close to the engine start/stop button. If the wireless access module detects a communication failure with the internal immobilizer IC when it starts the authentication, the DTC is set.
2. Condition for setting DTC B1035[49]
- The wireless access module detects a communication failure with the internal immobilizer IC.
3. Action taken when DTC B1035[49] sets
When the engine start/stop button is pressed:
- The key monitor warning light illuminates for 10 seconds.
- The engine start/stop button indicator light (amber) flashes for 10 seconds.
- CHECK SYSTEM will be displayed on the multi-information display for 10 seconds.
- The buzzer built into the instrument panel cluster will sound 3 times.
When the power mode is ON and there is a current failure:
- The key monitor warning light illuminates.
When door locking/unlocking is requested:
- The key monitor warning light illuminates for 10 seconds.
- The engine start/stop button indicator light (amber) flashes for 10 seconds.
- CHECK SYSTEM will be displayed on the multi-information display for 10 seconds.
- The external buzzer will sound for 3 seconds.