DTC U0599:68 [FRONT BODY CONTROL MODULE (FBCM)]


id0902p2010900

System malfunction location

Error signal received from DC-DC converter

Detection condition
•  The front body control module (FBCM) receives error signals from the DC-DC converter for 5 s or more with the ignition switched ON (engine off or on).
Fail-safe
Possible cause
•  DC-DC converter malfunction
•  Front body control module (FBCM) malfunction
System wiring diagram

Diagnostic Procedure

Step

Inspection

Action

1
PERFORM DTC INSPECTION AND VERIFY IF MALFUNCTIONING PART IS DC-DC CONVERTER
•  Clear front body control module (FBCM) DTCs using the M-MDS.
•  Switch the ignition ON (engine off or on) and wait for 5 s or more.
•  Perform the front body control module (FBCM) DTC inspection using the M-MDS.
•  Is the DTC U0599:68 displayed?
Yes
Replace the DC-DC converter, then go to the next step.
No
Go to Step 3.
2
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
•  Clear front body control module (FBCM) DTCs using the M-MDS.
•  Switch the ignition ON (engine off or on) and wait for 5 s or more.
•  Perform the front body control module (FBCM) DTC inspection using the M-MDS.
•  Is the DTC U0599:68 displayed?
Yes
replace the front body control module (FBCM), then go to the next step.
No
Go to the next step.
3
VERIFY IF OTHER DTCs DISPLAYED
•  Are any other DTCs displayed?
Yes
Repair the malfunctioning part according to the applicable DTC troubleshooting.
No
DTC troubleshooting completed.