PERSONALIZATION FEATURES


id120000000000

•  The following systems can be customized.
•  When performing a customized setting, refer to the referenced section for the detailed setting procedure.
•  Settings of some personalization features displayed on the M-MDS cannot be switched depending on the vehicle specification.

Smart City Brake Support (SCBS)

Personalization features

Setting contents

Setting procedure

The operation of smart city brake support (SCBS) can be turned off.
ON / OFF
Instrument cluster (with TFT LCD) is used.


Security And Locks

Note
•  There are two types of customization procedures; one using the M-MDS and the other using the audio unit screen.

Advanced keyless entry system

Personalization features

Setting contents

Setting procedure

The advanced keyless entry system and push button start system functions can be disabled.
Enabled./Disabled.
M-MDS is used.
The out-of-area (reception area) type auto lock function can be set.
Not Adopted./OFF/ON
M-MDS is used.
OFF/ON
Audio unit screen is used for the setting.
The operation start time of the auto re-lock function can be changed.
Not Adopted./30 seconds/60 seconds/90 seconds
M-MDS is used.
30 seconds/60 seconds/90 seconds
Audio unit screen is used for the setting.
The keyless beeper volume can be adjusted.
Not Adopted./Off/Low/Medium/High
M-MDS is used.
Off/Low/Medium/High
Audio unit screen is used for the setting.


Keyless entry system

Personalization features

Setting contents

Setting procedure

The keyless entry system and push button start system functions can be disabled.
Enabled./Disabled.
M-MDS is used.
The operation start time of the auto re-lock function can be changed.
Not Adopted./30 seconds/60 seconds/90 seconds
M-MDS is used.
30 seconds/60 seconds/90 seconds
Audio unit screen is used for the setting.


Power door lock system

Personalization features

Setting contents

Setting procedure

Auto door lock function can be changed.
Not Adopted. / OFF / Lock When Driving. / Lock: Driving, Unlock: IGN Off. / Lock When Shifting Out Of P. / Lock: Shift From P, Unlock: In P.
M-MDS is used.


Lighting Systems


Auto light system

Note
•  There are two types of customization procedures; one using the M-MDS and the other using the audio unit screen.

Personalization features

Setting contents

Setting procedure

Auto light sensor sensitivity can be changed.
Not Adopted./Dark/Medium Dark/Medium/Medium Light/Light
M-MDS is used.
Light/Medium Light/Medium/Medium Dark/Dark
Audio unit screen is used for the setting.


Running light system

Personalization features

Setting contents

Setting procedure

The running light system function can be set.
OFF (running light non-illumination)/ON (running light illumination)


Turn light system

Note
•  There are two types of customization procedures; one using the M-MDS and the other using the audio unit screen.

Personalization features

Setting contents

Setting procedure

The turn light system can be switched between operable and inoperable.
Not Adopted./OFF/ON
M-MDS is used.
On/Off
Audio unit screen is used for the setting.


Room light control system

Note
•  There are two types of customization procedures; one using the M-MDS and the other using the audio unit screen.

Personalization features

Setting contents

Setting procedure

The front/rear map light illumination time after any door is open can be changed.
Not Adopted./30 minutes./60 minutes./10 minutes.
M-MDS is used.
60 minutes/30 minutes/10 minutes
Audio unit screen is used for the setting.
The front/rear map light illumination time after all door are closed can be changed.
Not Adopted./15 seconds./7.5 seconds./30 seconds./60 seconds.
M-MDS is used.
60 seconds/30 seconds/15 seconds/7.5 seconds
Audio unit screen is used for the setting.


High Beam Control (HBC) System

Note
•  There are two types of customization procedures; one using the M-MDS and the other using the audio unit screen.

Personalization features

Setting contents

Setting procedure

The high beam control (HBC) system can be switched between operable and inoperable.
Not Adopted./OFF/ON
M-MDS is used.
On/Off
Audio unit screen is used for the setting.


Wiper/Washer System

Note
•  There are two types of customization procedures; one using the M-MDS and the other using the audio unit screen.

Auto wiper system

Personalization features

Setting contents

Setting procedure

The auto wiper function can be disabled.
Not Adopted./Off*1 (Intermittent)/On (Rain Sensing)
M-MDS is used.
On (Rain Sensing)/Off*1 (Intermittent)
Audio unit screen is used for the setting.

*1  :If the function is set to “Off”, the wipers will operate intermittently with the wiper switch in AUTO position.


Instrumentation/Driver Info.

Note
•  There are two types of customization procedures; one using the M-MDS and the other using the instrument cluster.

Instrument cluster

Personalization features

Setting contents

Setting procedure

The volume for the lights-on reminder warning alarm can be changed.
Not Adopted./OFF/Low/High
M-MDS is used.
High/Low/OFF
Instrument cluster (with TFT LCD) is used.
The volume of the turn and hazard indicator alarm can be changed.
Not Adopted./Low/High
M-MDS is used.
High/Low
Instrument cluster (with TFT LCD) is used.
The display language can be changed.
Instrument cluster (with TFT LCD) is used.
The distance unit can be changed.
km / miles
Instrument cluster (with TFT LCD) is used.
The temperature unit can be changed.
°C /°F
Instrument cluster (with TFT LCD) is used.
The sound volume for the following operations can be changed.
•  Trip computer data is reset
―  INFO switch is pressed for 1.5 s or more while average fuel economy/average vehicle speed is displayed.
•  Scrolling value is operated
―  Up/down switch on period setting screen of maintenance monitor is pressed for 1.5 s or more.
High / Low / OFF
Instrument cluster (with TFT LCD) is used.
The reset method for the average fuel economy can be changed.
Reset Now / Reset w/ Trip A
Instrument cluster (with TFT LCD) is used.


Rear Vehicle Monitoring (RVM) System

Note
•  There are two types of customization procedures; one using the M-MDS and the other using the instrument cluster.

Personalization features

Setting contents

Setting procedure

The volume of the rear vehicle monitoring (RVM) warning alarm can be changed.
Not Adopted./OFF/Low/High
M-MDS is used.
High/Low/OFF
Instrument cluster (with TFT LCD) is used.


Blind Spot Monitoring (BSM) System

Personalization features

Setting contents

Setting procedure

The volume of the blind spot monitoring (BSM) warning alarm can be changed.
Not Adopted./OFF/Low/High
M-MDS is used.


Lane Departure Warning System (LDWS)

Note
•  There are two types of customization procedures; one using the M-MDS and the other using the instrument cluster.

Personalization features

Setting contents

Setting procedure

The volume of the LDWS warning alarm (Rumble) can be changed.
Not Adopted./Volume 1/Volume 2/Volume 3
M-MDS is used.
High/Medium/Low
Instrument cluster (with TFT LCD) is used.
The volume of the LDWS warning alarm (Beep) can be changed.
Beep/Rumble
M-MDS is used.
Rumble/Beep
Instrument cluster (with TFT LCD) is used.
The warning operation timing of the lane departure warning system (LDWS) can be changed.
Not Adopted/Adaptive/Early/Medium/Late
M-MDS is used.
Early/Medium/Late/Adaptive
Instrument cluster (with TFT LCD) is used.
The warning operation sensitivity of the lane departure warning system (LDWS) can be changed.
Not Adopted./Often/Medium/Rare
M-MDS is used.
Often/Medium/Rare
Instrument cluster (with TFT LCD) is used.
The high and low range of the LDWS warning alarm can be changed.
High/Low
Instrument cluster (with TFT LCD) is used.