DTC U0001:88/U0100:00/U0101:00/U0104:00/U0114:00/U0128:00/U0131:00/U0151:00/U0155:00/U023A:00 [DYNAMIC STABILITY CONTROL (DSC)]


id0402b2850100

DTC
U0001:88, U0100:00, U0101:00, U0104:00, U0114:00, U0128:00, U0131:00, U0151:00, U0155:00, U023A:00
CAN line
DETECTION CONDITION
•  U0001:88
―  Open or short circuit in CAN system wiring harness is detected.
•  U0100:00
―  Communication error with PCM is detected in CAN communication.
•  U0101:00
―  Communication error with TCM is detected in CAN communication.
•  U0104:00
―  Communication error with radar unit is detected in CAN communication.
•  U0114:00
―  Communication error with 4WD control module is detected in CAN communication.
•  U0128:00
―  Communication error with electric parking brake control module is detected in CAN communication.
•  U0131:00
―  Communication error with EPS CM is detected in CAN communication.
•  U0151:00
―  Communication error with SAS control module is detected in CAN communication.
•  U0155:00
―  Communication error with instrument cluster is detected in CAN communication.
•  U023A:00
―  Communication error with forward sensing camera (FSC) is detected in CAN communication.
FAIL-SAFE FUNCTION
Refer to “DTC Table” and “Fail-safe function table”. (See DTC TABLE [DYNAMIC STABILITY CONTROL (DSC)].)
POSSIBLE CAUSE
•  CAN system wiring harness open or short circuit
•  CAN system wiring harness open or short circuit with PCM
•  CAN system wiring harness open or short circuit with TCM
•  CAN system wiring harness open or short circuit with radar unit
•  CAN system wiring harness open or short circuit with electric parking brake control module
•  CAN system wiring harness open or short circuit with 4WD control module
•  CAN system wiring harness open or short circuit with EPS CM
•  CAN system wiring harness open or short circuit with SAS control module
•  CAN system wiring harness open or short circuit with instrument cluster
•  CAN system wiring harness open or short circuit with forward sensing camera (FSC)
•  instrument cluster malfunction
SYSTEM WIRING DIAGRAM
Not applicable


Diagnostic procedure

•  Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system. (See FOREWORD [SKYACTIV-G 2.0/2.5, SKYACTIV-D 2.2 (MTX) (L.H.D.)].) (See FOREWORD [SKYACTIV-G 2.0/2.5, SKYACTIV-D 2.2 (MTX) (R.H.D.)].) (See FOREWORD [SKYACTIV-G 2.5T, SKYACTIV-D 2.2 (ATX) (L.H.D.)].) (See FOREWORD [SKYACTIV-G 2.5T, SKYACTIV-D 2.2 (ATX) (R.H.D.)].)