NO.4 A MALFUNCTION IN THE SYSTEM EVEN THOUGH THE ABS WARNING LIGHT, BRAKE SYSTEM WARNING LIGHT, TCS/DSC INDICATOR LIGHT AND TCS OFF INDICATOR LIGHT (WITHOUT OFF-ROAD TRACTION ASSIST)/OFF-ROAD TRACTION ASSIST INDICATOR LIGHT (WITH OFF-ROAD TRACTION ASSIST) ARE NOT ILLUMINATED [DYNAMIC STABILITY CONTROL (DSC)]
id0403b2867300
|
4 |
There is a malfunction in the system even though ABS warning light, brake system warning light, TCS/DSC indicator light and TCS OFF indicator light (without Off-road traction assist)/Off-road traction assist indicator light (with Off-road traction assist) do not illuminate |
|---|---|
|
POSSIBLE CAUSE
|
• There is a mechanical malfunction in system.
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
CONFIRM DSC HU/CM DTC
• Retrieve the DSC HU/CM DTC using the M-MDS.
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY SOLENOID VALVE OPERATION
• Switch the ignition to off.
• Connect the M-MDS to the DLC-2.
• Switch the ignition to ON (engine off).
• Access the active command mode for the solenoid valve using the M-MDS.
• Does the solenoid valve operate?
|
Yes
|
Inspect the conventional brake system.
Repair or replace any malfunctioning parts according to the inspection result.
|
|
No
|
Repair or replace any malfunctioning parts according to the inspection result.
|
||