CLUTCH DISC INSPECTION [D66M-R, D66MX-R]
id0510mf157500
-
Caution
-
• The clutch cover equipped on the D66M(X)-R cannot be removed once and then reinstalled. For this reason, do not remove the clutch cover when performing the inspection.
1. Remove the manual transaxle. (See MANUAL TRANSAXLE REMOVAL/INSTALLATION [D66M-R].) (See MANUAL TRANSAXLE REMOVAL/INSTALLATION [D66MX-R].)
2. Adjust the thickness of the thickness gauge to 2.5 mm {0.098 in}.
3. Insert the thickness gauge from the notch of the dual-mass flywheel and verify that the facing on the clutch cover side is thicker than the thickness gauge.
-
Clutch disc facing thickness on clutch cover side (SKYACTIV-D 2.2 (Fuel injector (2pin type)))
-
New part (2WD): 3.6 mm {0.14 in}
New part (4WD): 3.7 mm {0.15 in}
Maximum: 2.5 mm {0.098 in}
-
Clutch disc facing thickness on clutch cover side (SKYACTIV-D 2.2 (Fuel injector (6pin type)))
-
New part: 3.6 mm {0.14 in}
Maximum: 2.1 mm {0.083 in}
-
