NO.1 ELECTRIC POWER STEERING (EPS) WARNING LIGHT DOES NOT ILLUMINATE WITH IGNITION SWITCHED ON [ELECTRIC POWER STEERING (EPS)]
id0603a2950600
|
1
|
Electric power steering (EPS) warning light does not illuminate with ignition switched ON.
|
|
TROUBLESHOOTING HINTS
• EPS warning light circuit malfunction in the instrument cluster.
• An error originates from the EPS CM, and the off signal is generated.
|
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
• Turn on the EPS warning light at instrument cluster using the “WL+IL” of the M-MDS active command modes function.
• Does the EPS warning light turn on?
|
Yes
|
EPS CM malfunction. Replace the EPS CM.
|
|
No
|
Perform the instrument cluster configuration, then repeat the inspection from Step 1.
If the malfunction recurs, replace the instrument cluster.
|
||