DOOR ADJUSTMENT


id091100521100

1.  Measure the gap and height difference between the door and the body.

•  If the measured value exceeds the standard clearance, adjust the door using the following procedure.

2.  Loosen the door hinge installation bolts and adjust the door.

ac5wzw00011437

Standard clearance
a: 2.7―4.5 mm {0.11―0.17 in}
b: -1.0―1.0 mm {-0.039―0.039 in}
c: 2.8―4.5 mm {0.12―0.17 in}
d: -1.0―1.0 mm {-0.039―0.039 in}
e: 2.5―4.5 mm {0.10―0.17 in}
f: -1.0―1.0 mm {-0.039―0.039 in}

3.  Tighten the door hinge installation bolts. (See FRONT DOOR REMOVAL/INSTALLATION.) (See REAR DOOR REMOVAL/INSTALLATION.)

4.  If the door does not open/close smoothly, adjust the door by loosening the door lock striker installation screws. (See DOOR LOCK STRIKER REMOVAL/INSTALLATION.)

5.  Spray or pour water on the door and surrounding area using a hose or a high pressure car wash machine, and verify that there is no water leakage.

6.  If the front door is adjusted, perform the side camera aiming. (with side camera) (without 360° view monitor system) (See SIDE CAMERA AIMING.)

7.  Perform the 360° view monitor system aiming. (with 360° view monitor system) (See 360°VIEW MONITOR SYSTEM AIMING.)