NO.3 i-stop INDICATOR LIGHT (GREEN) FLASHES [WITH CYLINDER DEACTIVATION (SKYACTIV-G 2.0, SKYACTIV-G 2.5)]

id1103m2000800

3

i-stop INDICATOR LIGHT (GREEN) FLASHES
DESCRIPTION
•  i-stop indicator light (green) remains flashing during i-stop.
POSSIBLE CAUSE
Note
•  If the driver’s door is open while i-stop is operating, the i-stop warning light (green) flashes continuously.
•  False detection of insufficient brake depression (fluid pressure).
―  Brake fluid pressure sensor malfunction

Diagnostic Procedure

STEP

INSPECTION

RESULTS

ACTION
1
VERIFY DTC
•  Retrieve the PCM and DSC HU/CM DTCs using the M-MDS.
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [PCM (WITH CYLINDER DEACTIVATION (SKYACTIV-G 2.0, SKYACTIV-G 2.5))].)
(See DTC TABLE [DYNAMIC STABILITY CONTROL (DSC)].)
No
Go to the next step.
2
INSPECT BRAKE FLUID PRESSURE SENSOR
•  Inspect the brake fluid pressure sensor.
•  Is there any malfunction?
Yes
Replace the DSC HU/CM.
(See DSC HU/CM REMOVAL/INSTALLATION [WITH CYLINDER DEACTIVATION (SKYACTIV-G 2.0, SKYACTIV-G 2.5)].)
No
Repeat the inspection from Step 1.
•  If the malfunction is not resolved, replace the PCM.
Go to the next step.
3
Verify the test results.
•  If normal, return to the diagnostic index to service any additional symptoms.
•  If a malfunction remains, inspect the related Service Information and perform the repair or diagnosis.
―  If the vehicle is repaired, troubleshooting is completed.
―  If the vehicle is not repaired or additional diagnostic information is not available, replace the PCM.