HEADLIGHT LEVELING ACTUATOR INSPECTION

id091800809700

Note
•  The headlight leveling actuator is integrated in the front combination light.
•  For the actuator inspection of the headlight auto leveling system, perform the headlight leveling actuator operation check mode. (See HEADLIGHT LEVELING ACTUATOR OPERATION CHECK MODE [ADAPTIVE FRONT LIGHTING SYSTEM (AFS) CONTROL MODULE].) (See HEADLIGHT LEVELING ACTUATOR OPERATION CHECK MODE [ADAPTIVE LED HEADLIGHTS CONTROL MODULE].)

1.  Verify that the voltages of each of the terminals are as indicated in the terminal voltage table.

•  If the voltage is not as indicated in the table, inspect the parts under Inspection item(s).
―  If the system does not work normally even though the parts or related wiring harnesses do not have any malfunction, replace the front combination light. (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)

Terminal Voltage List (Reference)

ac5wzw00000045

Terminal

Signal

Connection

Test condition

Voltage (V)

Inspection item (s)
F
Headlight leveling actuator signal
Headlight leveling switch
Light switch at HEAD position
Headlight leveling switch position 0
Approx. 10.1
•  Headlight leveling switch
•  Related wiring harness
Headlight leveling switch position -
Approx. 9.4
Headlight leveling switch position 1
Approx. 8.7
Headlight leveling switch position -
Approx. 7.9
Headlight leveling switch position 2
Approx. 7.2
Headlight leveling switch position -
Approx. 6.5
Headlight leveling switch position 3
Approx. 5.8
Headlight leveling switch position -
Approx. 5.1
Headlight leveling switch position 4
Approx. 4.4
Headlight leveling switch position -
Approx. 3.6
Headlight leveling switch position 5
Approx. 2.9
I
Headlight leveling actuator power supply
Headlight relay (LO)
Light switch at HEAD position
B+
•  Headlight relay (LO)
•  Related wiring harness
Light switch at OFF position
1.0 or less
L
Ground
•  Headlight leveling switch
•  Body ground
Under any condition
1.0 or less
•  Headlight leveling switch
•  Related wiring harness