NO.1 FREQUENT FRONT WHEEL SLIP [i-ACTIV AWD SYSTEM]
id0303d4134900
1
|
Frequent front wheel slip
|
[TROUBLESHOOTING HINTS]
• Tire traction performance is extremely poor for given road friction. (i-ACTIV AWD system is normal.)
• Improper wheel alignment (i-ACTIV AWD system is normal.)
• Rear differential oil temperature is extremely high (Fail-safe condition)
• Differential oil temperature sensor malfunction (Fail-safe condition)
• Compare slip frequency with another vehicle of the same model (under the same road conditions and tire traction performance).
• Replace tires with others of the same model and perform test under the same road conditions to determine if the malfunction was caused by tire traction performance.
• Coupling component malfunction
• 4WD solenoid malfunction
|
Diagnostic procedure
STEP |
INSPECTION |
ACTION |
|
---|---|---|---|
1
|
VERIFY DSC HU/CM, PCM, TCM, EPS CONTROL MODULE, AND 4WD CONTROL MODULE DTCs
• Verify DSC HU/CM, PCM, TCM, EPS control module, and 4WD control module DTCs using the M-MDS.
(See ON-BOARD DIAGNOSTIC TEST [PCM (WITHOUT CYLINDER DEACTIVATION (SKYACTIV-G 2.0, SKYACTIV-G 2.5))].)
(See DTC INSPECTION [DSC HU/CM].)
• Are there any DTCs present?
|
Yes
|
Go to applicable DTC inspection.
(See DTC TABLE [DSC HU/CM].)
|
No
|
Go to next step.
|
||
2
|
VERIFY TIRE AIR PRESSURE
• Inspect tire air pressure.
(See TIRE PRESSURE ADJUSTMENT.)
(See WHEEL AND TIRE SPECIFICATION.)
• Is it within specification?
|
Yes
|
Go to next step.
|
No
|
Adjust tire air pressure, then go to next step.
|
||
3
|
COMPARE WITH SAME MODEL TIRES
• Install tires of the same model.
• Perform simulation driving.
• Does malfunction recur?
|
Yes
|
Go to next step.
|
No
|
i-ACTIV AWD system is okay.
|
||
4
|
COMPARE WITH SAME MODEL VEHICLE
• Install tires of malfunctioning vehicle to another same model vehicle.
• Perform simulation driving.
• Does malfunction recur?
|
Yes
|
i-ACTIV AWD system is okay.
|
No
|
Go to next step.
|
||
5
|
INSPECT 4WD SOLENOID
• Inspect 4WD solenoid.
(See 4WD SOLENOID INSPECTION.)
• Is coupling component solenoid okay?
|
Yes
|
Inspect harness between 4WD solenoid and 4WD control module, then go to next step.
|
No
|
Replace coupling component.
|
||
6
|
INSPECT WHEEL ALIGNMENT
• Inspect wheel alignment.
• Is it okay?
|
Yes
|
Replace coupling component.
|
No
|
Inspect wheel alignment, and adjust it if necessary.
|