DTC U3000:16/U3000:1C/U3000:28/U3000:41/U3000:46/U3000:47/U3000:49/U3000:61/U3000:73/U3000:96 [ELECTRIC POWER STEERING (EPS) CONTROL MODULE]

id0602a6813600

DTC U3000:16, U3000:1C, U3000:28, U3000:41, U3000:46, U3000:47, U3000:49, U3000:61, U3000:73, U3000:96

EPS control module

DETECTION CONDITION

•  The on-board diagnostic function detects control module malfunction

FAIL-SAFE FUNCTION

•  Refer to “Fail-safe Function Table”. (See DTC TABLE [ELECTRIC POWER STEERING (EPS) CONTROL MODULE].)

POSSIBLE CAUSE

•  Internal malfunction of EPS control module

SYSTEM WIRING DIAGRAM

Not applicable

DTC U3000:16, U3000:1C, U3000:28, U3000:41, U3000:46, U3000:47, U3000:49, U3000:61, U3000:73, U3000:96	EPS control module
DETECTION CONDITION	• The on-board diagnostic function detects control module malfunction
FAIL-SAFE FUNCTION	• Refer to “Fail-safe Function Table”. (See DTC TABLE [ELECTRIC POWER STEERING (EPS) CONTROL MODULE].)
POSSIBLE CAUSE	• Internal malfunction of EPS control module
SYSTEM WIRING DIAGRAM	Not applicable

Diagnostic Procedure

Step

Inspection

Action

1

VERIFY DTC

•  Using the M-MDS, clear the DTC from the EPS control module.
(See CLEARING DTC [ELECTRIC POWER STEERING (EPS) CONTROL MODULE].)

•  Using the M-MDS, perform the EPS control module DTC inspection.
(See DTC INSPECTION [ELECTRIC POWER STEERING (EPS) CONTROL MODULE].)

•  Is the same Pending DTC present?

Yes

Replace the EPS control module.

(See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)

No

Go to the next step.

2

VERIFY THAT NO OTHER DTCs ARE PRESENT

•  Are any other DTCs output?

Yes

Go to the applicable DTC inspection.

(See DTC TABLE [ELECTRIC POWER STEERING (EPS) CONTROL MODULE].)

No

DTC troubleshooting completed.

Step	Inspection		Action
1	VERIFY DTC • Using the M-MDS, clear the DTC from the EPS control module. (See CLEARING DTC [ELECTRIC POWER STEERING (EPS) CONTROL MODULE].) • Using the M-MDS, perform the EPS control module DTC inspection. (See DTC INSPECTION [ELECTRIC POWER STEERING (EPS) CONTROL MODULE].) • Is the same Pending DTC present?	Yes	Replace the EPS control module. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)
1		No	Go to the next step.
2	VERIFY THAT NO OTHER DTCs ARE PRESENT • Are any other DTCs output?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [ELECTRIC POWER STEERING (EPS) CONTROL MODULE].)
2		No	DTC troubleshooting completed.