DTC U2132:00 [GATEWAY UNIT (GWU) (TYPE-B)]

id0902zc791900

Outline

System malfunction location

Communication error with 360°view monitor control module

Detection condition

•  The gateway unit (GWU) cannot receive CAN signal from the 360°view monitor control module for 5 s or more.

Fail-safe

Not applicable

Possible cause

•  Malfunction in CAN communication line between gateway unit (GWU) and 360°view monitor control module

•  360°view monitor control module malfunction

•  Gateway unit (GWU) malfunction

System wiring diagram

Not applicable

Connector diagram

Not applicable

System malfunction location	Communication error with 360°view monitor control module
Detection condition	• The gateway unit (GWU) cannot receive CAN signal from the 360°view monitor control module for 5 s or more.
Fail-safe	Not applicable
Possible cause	• Malfunction in CAN communication line between gateway unit (GWU) and 360°view monitor control module • 360°view monitor control module malfunction • Gateway unit (GWU) malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable

Diagnostic Procedure

• Perform an inspection in accordance with the multiplex communication system diagnostic procedure. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [TYPE-B (L.H.D.)].) (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [TYPE-B (R.H.D.)].)