REAR SEAT BACK STRIKER REMOVAL/INSTALLATION

id091300812100

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Pull the recliner knob to fold the rear seat back.

3.  Remove the following parts:

(1)  Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION.)

(2)  Sub-trunk (See SUB-TRUNK REMOVAL/INSTALLATION.)

(3)  Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

(4)  Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(5)  Trunk side trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

4.  Remove the following bolts in the order of the numbers shown in the figure.

ac5wzw00015130

5.  Remove the rear seat back striker.

6.  Install in the reverse order of removal.