DTC U0010:88/U0155:00 [BLIND SPOT MONITORING (BSM) CONTROL MODULE]

id1502b5052500

Description
•  U0010:88
―  Module communication error (MS-CAN)
•  U0155:00
―  Communication error with instrument cluster
Detection condition
•  U0010:88
―  Blind spot monitoring (BSM) control module (LH) detected a CAN bus communication line (MS-CAN) malfunction.
•  U0155:00
―  Blind spot monitoring (BSM) control module (LH) cannot receive a CAN signal from the instrument cluster for 5 s or more.
Fail-safe
•  U0010:88
―  Blind spot monitoring (BSM) system is stopped.
•  U0155:00
―  Blind spot monitoring (BSM) system is stopped.
Possible cause
•  Malfunction in CAN bus communication line
•  Malfunction in CAN communication line between instrument cluster and blind spot monitoring (BSM) control module
System wiring diagram
Not applicable


Diagnostic Procedure

•  Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [TYPE-A (SKYACTIV-G 2.0/2.5, SKYACTIV-D 2.2 (MTX) (L.H.D.))].) (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [TYPE-A (SKYACTIV-G 2.0/2.5, SKYACTIV-D 2.2 (MTX) (R.H.D.))].) (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [TYPE-A (SKYACTIV-G 2.5T, SKYACTIV-D 2.2 (ATX) (L.H.D.))].) (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [TYPE-A (SKYACTIV-G 2.5T, SKYACTIV-D 2.2 (ATX) (R.H.D.))].) (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [TYPE-B (L.H.D.)].) (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [TYPE-B (R.H.D.)].)