REAR DOOR MODULE REMOVAL/INSTALLATION

id091100813500

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION)

(2)  Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION)

(3)  Rear door speaker (See REAR DOOR SPEAKER REMOVAL/INSTALLATION)

(4)  Rear power window regulator (See REAR POWER WINDOW REGULATOR REMOVAL/INSTALLATION)

(5)  Rear door glass (See REAR DOOR GLASS REMOVAL/INSTALLATION)

(6)  Inner handle (SeeINNER HANDLE REMOVAL/INSTALLATION)

3.  Disconnect the rear door wiring harness connector. (See REAR DOOR REMOVAL/INSTALLATION.)

4.  Remove the tab, then remove the rear door wiring harness bracket.

acxaaw00000026

5.  Remove screws A and fastener.

acxaaw00000027

6.  Remove the rear door module.

7.  Install in the reverse order of removal.