DTC U0402:68 [ELECTRONIC 4WD CONTROL SYSTEM]
id0302a6201300
DTC U0402:68 |
Abnormal message from TCM |
||
---|---|---|---|
DETECTION CONDITION
|
• Correct data cannot be received from TCM
|
||
FAIL-SAFE FUNCTION
|
• Control maintained by the specified data.
|
||
POSSIBLE CAUSE
|
• TCM malfunction
• 4WD CM malfunction
|
||
SYSTEM WIRING DIAGRAM
|
Not applicable
|
Diagnostic Procedure
Step |
Inspection |
Results |
Action |
---|---|---|---|
1
|
INSPECT FOR TCM MALFUNCTION
• Using the M-MDS, perform the DTC inspection for the TCM.
• Is the DTC displayed?
|
Yes
|
Go to applicable DTC inspection.
DTC troubleshooting completed, then go to the next step.
|
No
|
Go to the next step.
|
||
2
|
VERIFY THAT THE SAME DTC IS NOT PRESENT
• Clear the DTCs from the memory.
• Using the M-MDS, perform the 4WD control module DTC inspection.
• Is the same DTC present?
|
Yes
|
Replace the 4WD CM, then go to the next step.
|
No
|
Go to the next step.
|
||
3
|
VERIFY THAT NO OTHER DTCS ARE PRESENT
• Are any other DTCs output?
|
Yes
|
Go to the applicable DTC inspection.
|
No
|
DTC troubleshooting completed.
|