ELECTRIC PARKING BRAKE AUTOMATIC RELEASE FUNCTION DURING ACCELERATION OPERATION TOO EARLY/LATE ON SLOPE [ELECTRIC PARKING BRAKE]


id040328250700

Note
•  If there is any vehicle malfunction complaint lodged by a customer, perform FOREWORD [ELECTRIC PARKING BRAKE] malfunction diagnosis according to the troubleshooting procedure. (See FOREWORD [ELECTRIC PARKING BRAKE].)

Description

•  Electric parking brake is released too early when the electric parking brake automatic release function during acceleration is operated on a slope.
•  Electric parking brake is released too late when the electric parking brake automatic release function during acceleration is operated on a slope.

Possible Cause

•  Electric parking brake control module malfunction

Diagnostic Procedure

Step

Inspection

Action

1
VERIFY ALL SYSTEM DTCs
•  Switch the ignition off.
•  Switch the ignition ON (engine off or on) and wait for 10 s or more.
•  Perform a CMDTC self-test using the M-MDS.
•  Are any DTCs displayed?
Yes
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
No
Go to the next step.
2
VERIFY IF THE ELECTRIC PARKING BRAKE WARNING LIGHT IS TURNED ON
•  Verify if the electric parking brake warning light is turned on.
•  Is the electric parking brake warning light turned on?
Yes
Perform an inspection referring to “ELECTRIC PARKING BRAKE WARNING LIGHT TURNS ON”.
No
Replace the electric parking brake control module.