FRONT DOOR GARNISH REMOVAL/INSTALLATION

id091600446300

Replacement part

Removal

Warning

•  Always wear gloves when using a utility knife. Using a utility knife with bare hands can cause injury.

1.  Remove the front beltline molding. (See FRONT BELTLINE MOLDING REMOVAL/INSTALLATION.)

2.  Peel off the double-sided adhesive tape shown in the figure using a utility knife.

3.  Pull the front door garnish in the direction of the arrow shown in the figure and remove it while detaching the clips.

ac8wzw00000770

Installation

1.  Remove any grease or dirt from the front door garnish installation area.

2.  Peel off all the tape backing from the double-sided adhesive tape on the front door garnish.

3.  Install the front door garnish.

4.  Install the front beltline molding. (See FRONT BELTLINE MOLDING REMOVAL/INSTALLATION.)