DTC U0127:00 [INSTRUMENT CLUSTER (TPMS)]

id020210811800

DTC
U0127:00
Communication error to start stop unit
DETECTION CONDITION
•  Communication error to start stop unit is detected.
FAIL-SAFE FUNCTION
•  Refer to “Fail-safe function table”. (See DTC TABLE [INSTRUMENT CLUSTER (TPMS)].)
POSSIBLE CAUSE
•  CAN communication line malfunction with start stop unit
SYSTEM WIRING DIAGRAM
Not applicable


Diagnostic Procedure

•  Perform inspection according to the diagnostic procedure in MULTIPLEX COMMUNICATION SYSTEM. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [TYPE-A].) (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [TYPE-B].)