DTC B11D9:17 [REAR POWER SEAT CONTROL MODULE (RH)]
id0902t3570900
Description |
Rear power seat control module (RH) B+ (POWER) power supply voltage malfunction |
---|---|
Detection condition
|
• The rear power seat control module (RH) detects that the battery power supply (POWER) voltage is a certain value or more.
|
Fail-safe
|
• Inhibits the rear power slide function from being driven.
• Inhibits the rear power recliner function from being driven.
• Inhibits the rear power walk-in operation function from being driven.
• Inhibits the rear power walk-in return function from being driven.
|
Possible cause
|
• Charging system malfunction (Related DTCs are stored in the PCM)
• Battery malfunction
• Generator malfunction
• Rear power seat control module (RH) malfunction
|
System wiring diagram
|
Not applicable
|
Diagnostic Procedure
Step |
Inspection |
Action |
|
---|---|---|---|
1
|
VERIFY PCM DTCs
• Retrieve the PCM DTCs using the M-MDS.
• Are any DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
|
No
|
Go to the next step.
|
||
2
|
INSPECT BATTERY
• Inspect the battery.
(See BATTERY INSPECTION.)
• Is the part normal?
|
Yes
|
Go to the next step.
|
No
|
Replace the battery, then go to Step 5.
|
||
3
|
INSPECT GENERATOR
• Inspect the generator.
• Is the part normal?
|
Yes
|
Go to the next step.
|
No
|
Replace the generator, then go to Step 5.
|
||
4
|
INSPECT REAR POWER SEAT CONTROL MODULE (RH)
• Inspect the rear power seat control module (RH).
• Is the part normal?
|
Yes
|
Go to the next step.
|
No
|
Replace the second-row seat (RH), then go to the next step.
|
||
5
|
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
• Reconnect all the disconnected connectors with the negative battery terminal disconnected.
• Connect the negative battery terminal.
• Clear the DTC for the rear power seat control module (RH) using the M-MDS.
• Retrieve the rear power seat control module (RH) DTCs using the M-MDS.
• Is the same Pending DTC present?
|
Yes
|
Repeat the inspection from Step 1.
• If the malfunction recurs, replace the second-row seat (RH).
Go to the next step.
|
No
|
Go to the next step.
|
||
6
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
|
No
|
DTC troubleshooting completed.
|