DTC B1B89:44 [REAR POWER SEAT CONTROL MODULE (RH)]


id0902t3571600

Description

Incorrect seat position

Detection condition
•  Rear power seat control module (RH) detected any of the following conditions.
―  Seat position sensor (RH) related malfunction
―  Error in internal data memory for seat position detection
Fail-safe
•  Inhibits the rear power slide function from being driven.
•  Inhibits the rear power recliner function from being driven.
•  Inhibits the rear power walk-in operation slide function from being driven.
•  Inhibits the rear power walk-in return function from being driven.
Possible cause
•  Rear power seat control module (RH) detected any of the following conditions.
―  Seat position sensor (RH) input circuit malfunction (DTC B1B89:12, B1B89:13)
―  Seat position sensor (RH) power supply circuit malfunction (DTC B1D63:11)
•  Rear power seat control module (RH) malfunction
System wiring diagram
Not applicable


Diagnostic Procedure

Step

Inspection

Action

1
VERIFY REAR POWER SEAT CONTROL MODULE (RH) DTCs
•  Retrieve the rear power seat control module (RH) DTCs using the M-MDS.
•  Are following DTCs present?
―  B1B89:12
―  B1B89:13
―  B1D63:11
Yes
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
No
Go to the next step.
2
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
•  Clear the DTC for the rear power seat control module (RH) using the M-MDS.
•  Retrieve the rear power seat control module (RH) DTCs using the M-MDS.
•  Is the same Pending DTC present?
Yes
Replace the second-row seat (RH), then go to the next step.
No
Go to the next step.
3
VERIFY IF OTHER DTCs DISPLAYED
•  Are any other DTCs displayed?
Note
•  When this DTC is cleared from the rear power seat control module (RH), DTC B1B89:54 is displayed.
Yes
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
No
DTC troubleshooting completed.