FUEL PUMP UNIT INSPECTION [MZI-3.7]

id0114d2801100

Continuity Inspection

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZI-3.7].)

2.  To remove the service hole cover, remove the following parts:

(1)  Second-row seat (See SECOND-ROW SEAT REMOVAL/INSTALLATION.)

(2)  Edge cover (See LONG SLIDER REMOVAL/INSTALLATION.)

(3)  Long slider cover (See LONG SLIDER REMOVAL/INSTALLATION.)

(4)  Rear heat duct No.3 (See REAR HEAT DUCT COMPONENT REMOVAL/INSTALLATION.)

(5)  Service hole cover (See FUEL PUMP UNIT REMOVAL/INSTALLATION [MZI-3.7].)

3.  Disconnect the fuel pump unit connector.

4.  Inspect for continuity between fuel pump unit connector terminals B and D.

ac9wzw00002155

•  If there is no continuity, replace the fuel pump unit. (See FUEL PUMP UNIT REMOVAL/INSTALLATION [MZI-3.7].)