OIL SEAL (OIL PUMP) REPLACEMENT [AW6A-EL, AW6AX-EL]

id051723800800

1.  Remove the transaxle. (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)

Caution

•  The oil seal is easily damaged by the sharp edges of the torque converter splines. Do not let the splines contact the oil seal.

•  Do not drop the torque converter.

•  Do not pinch fingers.

2.  Remove the torque converter. (See TORQUE CONVERTER REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)

Caution

•  Do not to damage the bushing on the oil pomp body.

3.  Using a tape-wrapped flathead screwdriver, remove the oil seal from the oil pump body.

ac9uuw00002006

4.  Using the SST and a hammer, install the oil seal to the oil pump body.

ac9uuw00002007

Substitution SST

•  49 U027 003

Outer diameter: 67 mm {2.64 in} or more

Inner diameter: 54—61 mm {2.13—2.40 in}

Plate thickness: 2 mm {0.08 in} or more

5.  Coat the lip of the oil seal with grease.

6.  Install the torque converter. (See TORQUE CONVERTER REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)

7.  Install the transaxle. (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)

8.  Perform the mechanical system test. (See MECHANICAL SYSTEM TEST [AW6A-EL, AW6AX-EL].)