AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT [AY6A-EL, AY6AX-EL]

id0517k3297200

Warning

• A hot transaxle and ATF can cause severe burns. Turn off the engine and wait until then are cool.

Caution

• Do not remove the blind cap because it is not a removable part.

am6xuw00005035

Note

• The following procedure is for draining the ATF from the oil pan, not for complete replacement of the ATF.

1. Remove the overflow plug, and the O-ring.

am6xuw00004034

2. Remove the overflow tube, and the gasket, and drain the ATF.

am6xuw00004035

3. Install the new gasket, and overflow tube.

Tightening torque

24—54 N·m {2.5—5.5 kgf·m, 18—39 ft·lbf}

4. Temporarily tighten the overflow plug reusing the O-ring.