SUPPLIER IDENTIFICATION PROCEDURE [CAR-NAVIGATION SYSTEM]

id0902f7358400

Note

•  The supplier can vary with the module. When asking the supplier (service center) for repair or replacement, identify the supplier and fill in the Audio Repair Order Form with the following procedures.

Identification Using the Label or Inscribed Lettering

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Front console box mat (See FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION.)

(2)  Indicator panel (See INDICATOR PANEL REMOVAL/INSTALLATION.)

(3)  Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(4)  Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)

(5)  Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)

(6)  Car-navigation unit (See CAR-NAVIGATION UNIT REMOVAL/INSTALLATION.)

3.  Verify the supplier by referring to the label attached to each unit.

ac9wzw00001301

Verify Using the Diagnostic Assist Function

1.  Launch the diagnostic assist function. (See DIAGNOSTIC ASSIST FUNCTION [CAR-NAVIGATION SYSTEM].)

2.  Press the “Diagnostic assist code input switch”, and input the diagnostic assist code “06”.

am6zzw00002784

3.  Select “ENTER”.

4.  Identify the supplier code by referring to the display.

am6zzw00002785

Supplier code	Supplier name
01	SANYO Automedia
02	Panasonic
03	Clarion
04	Pioneer
05	VISTEON

5.  Press the POWER/VOLUME button to return to the diagnostic assist code input screen.

6.  Press the POWER/VOLUME button to release the diagnostic assist function.