DTC 11 [HEADLIGHT AUTO LEVELING SYSTEM]

id0902i7403500

Description

• Auto leveling control module initial setting

Detection Condition

• Auto leveling system initial setting is not performed or the setting is invalid

Possible Cause

• Auto leveling system initial setting is not performed or the setting is invalid

• Auto leveling control module malfunction

Diagnostic Procedure

Step

Inspection

Action

1

PERFORM AUTO LEVELING SYSTEM INITIAL SETTING

•  Perform the auto leveling system initial setting. (See AUTO LEVELING SYSTEM INITIALIZATION.)

•  Perform the headlight auto leveling system DTC inspection.
(See DTC INSPECTION [HEADLIGHT AUTO LEVELING SYSTEM].)

•  Are any DTCs displayed?

Yes

If any DTC other than DTC 11 is displayed

•  Perform the corresponding DTC inspection first.
(See DTC TABLE [HEADLIGHT AUTO LEVELING SYSTEM].)

When only DTC 11 is displayed

•  Replace the auto leveling control module.
(See AUTO LEVELING CONTROL MODULE REMOVAL/INSTALLATION.)

No

DTC troubleshooting completed.

Step	Inspection		Action
1	PERFORM AUTO LEVELING SYSTEM INITIAL SETTING • Perform the auto leveling system initial setting. (See AUTO LEVELING SYSTEM INITIALIZATION.) • Perform the headlight auto leveling system DTC inspection. (See DTC INSPECTION [HEADLIGHT AUTO LEVELING SYSTEM].) • Are any DTCs displayed?	Yes	If any DTC other than DTC 11 is displayed • Perform the corresponding DTC inspection first. (See DTC TABLE [HEADLIGHT AUTO LEVELING SYSTEM].) When only DTC 11 is displayed • Replace the auto leveling control module. (See AUTO LEVELING CONTROL MODULE REMOVAL/INSTALLATION.)
1		No	DTC troubleshooting completed.