GPS ANTENNA FEEDER INSPECTION
id092000802100
1. Disconnect the negative battery cable.
2. Remove the following parts:
- (1) Front console box mat (See FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION.)
- (2) Indicator panel (See INDICATOR PANEL REMOVAL/INSTALLATION.)
- (3) Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)
- (4) Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)
- (5) Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)
- (6) Car-navigation unit (See CAR-NAVIGATION UNIT REMOVAL/INSTALLATION.)
3. Disconnect the GPS antenna connector. (See GPS ANTENNA REMOVAL/INSTALLATION.)
4. Verify that the continuity is as indicated in the table.
-
• If not as indicated in the table, replace the GPS antenna feeder.
