DTC B1342 [MZI-3.7]
id0102d2815700
DTC B1342 |
PCM malfunction |
||
---|---|---|---|
DETECTION CONDITION
|
• Malfunction in the PCM internal circuit.
|
||
POSSIBLE CAUSE
|
• PCM EEPROM malfunction
• PCM parameter reset has not been completed
|
Diagnostic procedure
STEP |
INSPECTION |
ACTION |
|
---|---|---|---|
1
|
VERIFY CURRENT STATUS OF MALFUNCTION
• Clear the DTC from the PCM memory using the M-MDS.
• Perform the PCM parameter reset using the M-MDS.
• Is same DTC present?
|
Yes
|
Replace the PCM, then go to the next step.
|
No
|
Go to the next step.
|
||
2
|
VERIFY AFTER REPAIR PROCEDURE
• Perform the “AFTER REPAIR PROCEDURE”.
• Are any DTC present?
|
Yes
|
Go to the applicable DTC inspection.
(See DTC TABLE [MZI-3.7].)
|
No
|
Troubleshooting completed.
|