CRANKSHAFT POSITION (CKP) SENSOR INSPECTION [MZI-3.7]

id0140c3800500

Visual Inspection

1.  Remove the CKP sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION [MZI-3.7].)

2.  Verify that there are no metal shavings on the CKP sensor.

•  If there is a malfunction, replace the CKP sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION [MZI-3.7].)

3.  Install the CKP sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION [MZI-3.7].)

Resistance Inspection

1.  Remove the CKP sensor connector.

2.  Measure the resistance between the CKP sensor terminals.

•  If not within the specification, replace the CKP sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION [MZI-3.7].)