CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [MZI-3.7]

id0140c3801500

1.  Disconnect the negative battery cable.

2.  Remove the battery.

3.  Remove the following part for easier access.

•  Remove the MAF/IAT sensor connector.

(See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZI-3.7].)

•  Remove the vacuum hose (to master back).

(See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) REMOVAL/INSTALLATION [MZI-3.7].)

•  Remove the resonance chamber and air cleaner assy.

(See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZI-3.7].)

4.  Disconnect the CMP sensor connector.

5.  Remove the CMP sensor.

ac9wzw00000097

Note

•  Lubricate the CMP O-ring seal with clean engine oil.

6.  Install in the reverse order of removal.