NO.20 NOISE OCCURS AT IDLE WHEN VEHICLE IS STOPPED IN ALL POSITIONS/RANGES [AW6AX-EL]


id0503j6802500

20
Noise occurs at idle when vehicle is stopped in all positions/ranges
DESCRIPTION
•  Transaxle is noisy in all positions and ranges when the vehicle is idling.
POSSIBLE CAUSE
•  The malfunction is in the pressure solenoid or oil pump which causes a high-pitched noise to be emitted from the transaxle at idle.
Note
•  If a noise is emitted during shifting only, the malfunction is in the C1 clutch, C2 clutch, C3 clutch or B1 brake.
•  If a noise is emitted during shifting at certain gears only or during deceleration only, it is gear noise.
•  Before following the troubleshooting steps, make sure that the Automatic Transaxle On-Board Diagnostic and Automatic Transaxle Basic Inspection are conducted. (See BASIC INSPECTION [AW6AX-EL].)

Diagnostic procedure

STEP

INSPECTION

ACTION

1
•  Inspect engine condition.
•  Is there any engine concern (e.g. Rough idle)?
Yes
Go to appropriate symptom troubleshooting.
No
Replace basic inspection and repair or replace any malfunctioning parts according to the inspection result
2
•  Verify test results.
―  If normal, return to the diagnostic index to service any additional symptoms.
―  If the malfunction remains, inspect the related Service Information and perform repair or diagnosis.
•  If the vehicle is repaired, troubleshooting completed.
•  If the vehicle is not repaired or additional diagnostic information is not available, replace the TCM.