NO.26 STARTER DOES NOT WORK [AW6AX-EL]

id0503j6803100

26

Starter does not work

DESCRIPTION

•  Starter does not work even when in P or N position.

POSSIBLE CAUSE

•  Selector lever mis-adjustment

•  TR switch malfunction

•  N position learning is not performed.

•  Transaxle operates in fail-safe function (Starter lock system related circuit open or short)

•  Immobilizer system operating or system malfunction.

Diagnostic procedure

STEP	INSPECTION		ACTION
1	• Perform the N position learning. (See TCM REMOVAL/INSTALLATION [AW6AX-EL].) • Does the problem eliminate?	Yes	Troubleshooting is completed. If the other symptom occurs, go to applicable troubleshooting procedure.
1		No	Go to the next step.
2	• Inspect the TR switch. (See TRANSAXLE RANGE (TR) SWITCH INSPECTION [AW6AX-EL].) • Is the TR switch normal?	Yes	Go to engine system troubleshooting No.3 “WILL NOT CRANK” troubleshooting procedure.
2		No	Replace the TR switch and perform initial learning procedure. (See NO.17 EXCESSIVE SHIFT SHOCK FROM N TO D OR N TO R POSITION/RANGE [AW6AX-EL].)
3	• Verify test results. ― If normal, return to the diagnostic index to service any additional symptoms. ― If the malfunction remains, inspect the related Service Information and perform repair or diagnosis. • If the vehicle is repaired, troubleshooting completed. • If the vehicle is not repaired or additional diagnostic information is not available, replace the TCM.

26	Starter does not work
DESCRIPTION	• Starter does not work even when in P or N position.
POSSIBLE CAUSE	• Selector lever mis-adjustment • TR switch malfunction • N position learning is not performed. • Transaxle operates in fail-safe function (Starter lock system related circuit open or short) • Immobilizer system operating or system malfunction.