DRIVE PLATE REMOVAL/INSTALLATION [AW6AX-EL]

id0517j6802500

1.  Remove the transaxle. (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [AW6AX-EL].)

2.  Remove in the order indicated in the figure.

ac9wzw00000613

1
Drive plate mounting bolts
(SeeDrive Plate Mounting Bolts Removal Note.)
2
Drive plate
(SeeDrive Plate Installation Note.)

3.  Install in the reverse order of removal.


Drive Plate Mounting Bolts Removal Note

1.  Set the SST or equivalent against the drive plate.

ac9uuw00001686

2.  Remove the bolts and the drive plate.


Drive Plate Installation Note

1.  Remove the sealant from the bolt holes in the crankshaft and from the drive plate mounting bolts.

2.  Install the drive plate.

3.  Set the SST or equivalent against the drive plate.

ac9uuw00001687

4.  Tighten the new drive plate mounting bolts in two or three steps in the order shown.

Tightening torque
73—87 N·m {7.5—8.8 kgf·m, 53.9—64.1 ft·lbf}

5.  Install the transaxle. (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [AW6AX-EL].)