No.2 DOOR GLASS DOES NOT OPERATE USING THE KEYLESS TRANSMITTER [POWER WINDOW SYSTEMS (EXTERIOR OPEN/CLOSE FUNCTION)]

id090361808700

2

DOOR GLASS DOES NOT OPERATE USING THE KEYLESS TRANSMITTER

POSSIBLE CAUSE

•  Keyless control module malfunction

•  BCM malfunction

•  Open circuit in wiring harness between keyless control module and BCM

•  Any door or liftgate is open

•  Key is inserted in steering lock

2	DOOR GLASS DOES NOT OPERATE USING THE KEYLESS TRANSMITTER
POSSIBLE CAUSE	• Keyless control module malfunction • BCM malfunction • Open circuit in wiring harness between keyless control module and BCM • Any door or liftgate is open • Key is inserted in steering lock

Diagnostic Procedure

Step	Inspection		Action
1	• Inspect the door lock/unlock operation using the transmitter. • Does it operate normally?	Yes	Inspect the following parts, and repair or replace. • BCM (See BODY CONTROL MODULE (BCM) INSPECTION.) • Keyless control module (Vehicles with advanced keyless system) (See KEYLESS CONTROL MODULE INSPECTION [ADVANCED KEYLESS SYSTEM].)
1		No	Go to the next step.
2	• Inspect the open/close condition of the doors and the liftgate. • Is the reason why they do not lock/unlock because a door or the liftgate is open?	Yes	System is normal (Does not operate when a door or the liftgate is open).
2		No	Go to the next step.
3	• Verify whether the key is in the steering lock. • Is the reason why they do not lock/unlock because the key is inserted in the steering lock?	Yes	System is normal (Does not operate when the key is inserted in the steering wheel lock)
3		No	Go to the next step.
4	• When the lock/unlock operation does not operate for reasons other than the above Steps 2 and 3.	Yes	Inspect the following parts, and repair or replace. • Keyless control module (See KEYLESS CONTROL MODULE INSPECTION [ADVANCED KEYLESS SYSTEM]) • Wiring harness between keyless control module and BCM.
4		No	Reinspect for malfunction recurrence.If the malfunction is not corrected, repeat the procedure from Step 1.