ROOF CARRIER BRACKET REMOVAL/INSTALLATION
id091600801700
1. Disconnect the negative battery cable.
2. Partially peel back the seaming welt.
3. Remove the following parts:
- (1) A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)
- (2) Front scuff plate inner (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
- (3) Rear scuff plate inner (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
- (4) Front seat belt lower anchor installation bolt (Driver side) (See FRONT SEAT BELT REMOVAL/INSTALLATION.)
- (5) B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)
- (6) Front seat belt upper anchor installation bolt (See FRONT SEAT BELT REMOVAL/INSTALLATION.)
- (7) B-pillar upper trim (See B-PILLAR UPPER TRIM REMOVAL/INSTALLATION.)
- (8) Trunk box (See TRUNK BOX REMOVAL/INSTALLATION.)
- (9) Seat side box (See SEAT SIDE BOX REMOVAL/INSTALLATION.)
- (10) Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)
- (11) Third-row seat (See THIRD-ROW SEAT REMOVAL/INSTALLATION.)
- (12) Third-row seat belt lower anchor installation bolt (See THIRD-ROW SEAT BELT REMOVAL/INSTALLATION.)
- (13) Trunk side trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION)
- (14) Roof side trim (See ROOF SIDE TRIM REMOVAL/INSTALLATION.)
- (15) Second-row seat belt upper anchor installation bolt (See SECOND-ROW SEAT BELT REMOVAL/INSTALLATION.)
- (16) C-pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION.)
- (17) Third-row seat belt upper anchor installation bolt (See THIRD-ROW SEAT BELT REMOVAL/INSTALLATION.)
- (18) D-pillar trim (See D-PILLAR TRIM REMOVAL/INSTALLATION.)
- (19) Front map light (See FRONT MAP LIGHT REMOVAL/INSTALLATION.)
- (20) Sunvisor (See SUNVISOR REMOVAL/INSTALLATION.)
- (21) Assist handle (See ASSIST HANDLE REMOVAL/INSTALLATION.)
- (22) Headliner (See HEADLINER REMOVAL/INSTALLATION.)
4. Remove the nuts.
5. Remove the roof carrier bracket.
6. Install in the reverse order of removal.
-
Note
-
• Install the roof carrier bracket so that the arrow on it faces inward.
