FLOOR COVERING REMOVAL/INSTALLATION
id091700803000
1. Disconnect the negative battery cable.
2. Remove the following parts:
- (1) Front seat (See FRONT SEAT REMOVAL/INSTALLATION.)
- (2) Second-row seat (See SECOND-ROW SEAT REMOVAL/INSTALLATION.)
- (3) Edge cover (See LONG SLIDER REMOVAL/INSTALLATION.)
- (4) Long slider cover (See LONG SLIDER REMOVAL/INSTALLATION.)
- (5) Trunk box (See TRUNK BOX REMOVAL/INSTALLATION.)
- (6) Seat side box (See SEAT SIDE BOX REMOVAL/INSTALLATION.)
- (7) Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)
- (8) Third-row seat (See THIRD-ROW SEAT REMOVAL/INSTALLATION.)
- (9) Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)
- (10) Front scuff plate inner (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
- (11) Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
- (12) Dust cover (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)
- (13) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)
- (14) Console panel (See CONSOLE PANEL REMOVAL/INSTALLATION.)
- (15) Console cover (See CONSOLE COVER REMOVAL/INSTALLATION.)
- (16) Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)
- (17) Front console box mat (See FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION.)
- (18) Indicator panel (See INDICATOR PANEL REMOVAL/INSTALLATION.)
- (19) Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)
- (20) Console (See CONSOLE REMOVAL/INSTALLATION.)
- (21) Rear scuff plate inner (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
- (22) Front seat belt lower anchor installation bolt (Driver side) (See FRONT SEAT BELT REMOVAL/INSTALLATION.)
- (23) B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)
- (24) Third-row seat belt lower anchor installation bolt (See THIRD-ROW SEAT BELT REMOVAL/INSTALLATION.)
- (25) Trunk side trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)
- (26) Fuel-filler lid release cover (See FUEL-FILLER LID OPENER REMOVAL/INSTALLATION.)
3. Remove the fasteners A and B.
4. Remove the nut.
5. Take the floor covering out from the opened liftgate.
6. Install in the reverse order of removal.
