ACCESSORY SOCKET REMOVAL/INSTALLATION


id092000800400


Front

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)
(2)  Front console box mat (See FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION.)
(3)  Indicator panel (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION.)
(4)  Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)

3.  Remove in the order indicated in the table.

acxuuw00001014

1
Accessory socket
2
Cap

4.  Install in the reverse order of removal.


Center

1.  Disconnect the negative battery cable.

2.  Remove the console panel. (See CONSOLE PANEL REMOVAL/INSTALLATION.)

3.  Remove the console. (See CONSOLE REMOVAL/INSTALLATION.)

4.  Remove in the order indicated in the table.

acxuuw00001014

1
Accessory socket
2
Cap

5.  Install in the reverse order of removal.


Rear

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Trunk box (See TRUNK BOX REMOVAL/INSTALLATION.)
(2)  Seat side box (See SEAT SIDE BOX REMOVAL/INSTALLATION.)
(3)  Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)
(4)  Third-row seat (See THIRD-ROW SEAT REMOVAL/INSTALLATION.)
(5)  Rear scuff plate inner (RH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
(6)  Third-row seat belt lower anchor installation bolt (RH) (See THIRD-ROW SEAT BELT REMOVAL/INSTALLATION.)
(7)  Trunk side trim (Passenger side) (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

3.  Remove in the order indicated in the table.

acxuuw00001014

1
Accessory socket
2
Cap

4.  Install in the reverse order of removal.


Accessory Socket Removal Note

1.  While pressing a tape-wrapped flathead screwdriver against the cap projection, pull the accessory socket outward.

ac9uuw00002211


Cap Removal Note

1.  While pressing the tabs, pull the cap outwards.

acxuuw00001016